LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Automatic Transmission - Diagnosis) >> Component Tests >> Park/Neutral Position Switch

Park/Neutral Position Switch

WARNING: This page is about a different car, the 2002 Toyota Land Cruiser, 2002 Lexus LX 470, 2001 Toyota Land Cruiser, and 2001 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect harness connector at park/neutral position switch. Switch is located on left side of transmission. Using ohmmeter, check for continuity between specified terminals in accordance with gearshift lever position. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS  table. Replace PNP switch if defective.

PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS

Application & Shift Lever Position (1) Continuity Between Terminals No.
Park 1 & 3; 6 & 9
Reverse 2 & 3
Neutral 3 & 5; 6 & 9
Drive 3 & 7
2 3 & 4
Low 3 & 8
(1) For terminal identification, refer to illustration. See Fig 1.
Fig 1: Identifying Park/Neutral Position Switch Connector Terminals
G00115725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002