LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Overhaul - A650E) >> Torque Specifications

Torque Specifications

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2005 Lexus SC 430, 2005 Lexus IS 300, 2005 Lexus GS 430, 2005 Lexus GS 300, and 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Cooler Union 21 (29)
Drain Plug 15 (20)
Drive Plate Bolt
GS 300 & IS 300 61 (83)
Except GS 300 & IS 300 (1) 36 (49)
Drive Shaft Bolt 58 (79)
Extension Housing Bolt 25 (34)
Oil Pump-To-Case Bolt 16 (22)
O/D Support-To-Case Bolt 18 (25)
Shift Lever Nut 12 (16)
Torque Converter-To-Drive Plate Bolt 35 (48)
Transmission Housing Bolt
14-mm 25 (34)
17-mm 42 (57)
Transmission Output Flange Bolt 93 (126)
INCH Lbs. (N.m) 
Detent Spring Bolt 87 (9.8)
Line Pressure Test Plug 48 (5.4)
Oil Pan Bolt 65 (7.4)
Oil Pump-To-Stator Shaft Bolt 89 (10)
Oil Strainer Bolt 87 (9.8)
Overdrive Direct Clutch Speed Sensor 48 (5.4)
Parking Lock Pawl Bracket Bolt 65 (7.4)
Park/Neutral Position Switch
Adjusting Bolt 115 (13)
Retaining Nut 61 (6.9)
Solenoid-To-Valve Body Bolt 87 (9.8)
Solenoid Wiring Harness Bolt 48 (5.4)
Speed Sensor Bolt 48 (5.4)
Upper Valve Body-To-Lower Valve Body Bolt 57 (6.4)
Valve Body-To-Case Bolt 89 (10)
(1) Tighten each bolt in a crisscross pattern an additional 90 degrees.