LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Overhaul - A650E) >> Component Disassembly & Reassembly >> Rear Planetary Gear, No. 2 One-Way Clutch & Output Shaft >> Inspection

Rear Planetary Gear, No. 2 One-Way Clutch & Output Shaft: Inspection

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2005 Lexus SC 430, 2005 Lexus IS 300, 2005 Lexus GS 430, 2005 Lexus GS 300, and 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure inside diameter of rear planetary ring gear bushing. See Figure. Maximum bushing diameter is 1.518" (38.56 mm). Replace component if damaged or not within specification.
  2. Measure inside diameter of output shaft bushing. See Figure. Maximum bushing diameter is .791" (20.08 mm). Replace component if damaged or not within specifications.
  3. Measure planetary pinion gear thrust clearance. See Figure. Standard clearance should be .008-.024" (.20-.61 mm). Maximum clearance is .039" (1.00 mm). If clearance is not within specifications, replace planetary gear assembly.
scientia non olet · About LEMON Manuals