LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Overhaul - A650E) >> Component Disassembly & Reassembly >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2005 Lexus SC 430, 2005 Lexus IS 300, 2005 Lexus GS 430, 2005 Lexus GS 300, and 2004 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place oil pump on torque converter while working on pump. Remove seal rings from rear of oil pump. Remove bolts from rear of pump assembly. Remove stator shaft from pump housing. See Figure.
  2. Place reference mark on drive and driven gears for reassembly reference and remove from pump housing. If oil seal requires replacement, pry seal from housing with a screwdriver.
scientia non olet · About LEMON Manuals