Clearing Diagnostic Trouble Codes

WARNING: This page is about a different car, the 2003 Toyota RAV4, 2002 Toyota RAV4, 2002 Toyota Highlander, 2001 Toyota RAV4, and 2001 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If using TOYOTA scan tool, DTCs and freeze frame data may be cleared by switching from CHECK mode to NORMAL mode, or from NORMAL mode to CHECK mode.

DTCs can be cleared using scan tool connected to 16-pin DLC3. DLC3 is located under instrument panel, near steering column. See Figure. If using OBD-II scan tool to clear DTCs, follow scan tool manufacturer's operating instructions.