LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Automatic Transmission Diagnosis - U241E) >> Component Tests >> Park/Neutral Position Switch

Park/Neutral Position Switch

WARNING: This page is about a different car, the 2003 Toyota RAV4, 2002 Toyota RAV4, 2002 Toyota Highlander, 2001 Toyota RAV4, and 2001 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For circuit reference, see WIRING DIAGRAMS  and CONNECTOR IDENTIFICATION  .

Disconnect harness connector at Park/Neutral Position (PNP) switch. PNP switch is located on side of transaxle. Using a DVOM, check for continuity between specified terminals with gearshift lever in appropriate position. See Figure or Figure . Replace PNP switch if continuity is not as specified. If switch is okay, check and repair wiring harness or connector between PNP switch and ECM.

scientia non olet · About LEMON Manuals