LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Vacuum Brake Booster >> Removal (IS 300)

Removal (IS 300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front left wheel.
  2. Remove master cylinder. See MASTER CYLINDER .
  3. Disconnect vacuum hose from brake booster. Separate grommet from body through brake line. See Fig 1.
  4. Using special tool (09023-00100) and spanner, disconnect front-left brake line from flexible hose. Separate grommet from body through brake line.
  5. Disconnect front-left brake line from clamp.
  6. Remove bolts and disconnect clamps. Remove lower finish panel. Remove return spring, clip and clevis pin. Remove clevis and nuts.
  7. Move brake line down and back to allow removal of booster assembly. Remove booster and gasket.
Fig 1: Identifying Brake Booster Components (IS 300)
G00185223Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals