LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Master Cylinder >> Installation (SC 430)

Installation (SC 430)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install brake master cylinder assembly and tighten assembly nuts to specification. See TORQUE SPECIFICATIONS .
  2. Install brake lines to body with nuts and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Using special tool (09023-00100) and spanner, connect front brake line on left side to flexible hose and tighten to specification. See TORQUE SPECIFICATIONS .
  4. Using special tool (09023-00100), connect each brake line to its correct position on brake master cylinder. Tighten to specification. See TORQUE SPECIFICATIONS .
  5. To complete installation, reverse removal procedure.
  6. Fill reservoir and bleed brake system. See BLEEDING BRAKE SYSTEM .
  7. Check and adjust brake pedal height and free play. See BRAKE PEDAL HEIGHT & FREE PLAY  under ADJUSTMENTS.
  8. Check pedal reserve distance. See PEDAL RESERVE DISTANCE  under TESTING.
  9. Check fluid level in reservoir and check for brake fluid leakage.
scientia non olet · About LEMON Manuals