LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Master Cylinder >> Installation (LS 430)

Installation (LS 430)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust length of brake booster push rod. See POWER BRAKE UNIT PUSH ROD  under ADJUSTMENTS.
  2. To install, reverse removal procedure. Tighten nuts and brake lines to specification. See TORQUE SPECIFICATIONS .
  3. Fill brake reservoir with brake fluid and bleed brake system. See BLEEDING BRAKE SYSTEM .
  4. Check system for leaks and adjust brake pedal. See BRAKE PEDAL HEIGHT & FREE PLAY  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals