LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Front Brake Pads >> Removal (LS 430)

Removal (LS 430)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel.
  2. Check pad thickness and replace pads if they are not within specification. See DISC BRAKE SPECIFICATIONS .
  3. Remove clip, pin and anti-rattle spring.
  4. Remove brake pads.
  5. On right wheel, remove clamp, clip and bleeder screw cap. Disconnect pad wear indicator assembly from inner pad.
  6. Remove anti-squeal shims from each pad.
  7. On right wheel, check pad wear indicator assembly. See PAD WEAR INDICATOR ASSEMBLY  under testing.
  8. Check disc thickness. See FRONT BRAKE DISC .
  9. Check disc runout. See DISC RUNOUT  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals