LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Removal & Installation >> Front Brake Pads >> Removal & Installation (SC 430)

Removal & Installation (SC 430)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front brake caliper. See FRONT BRAKE CALIPER .
  2. Remove anti-squeal springs.
  3. Remove brake pads with anti-squeal shims.
  4. Remove anti-squeal shim and inner anti-squeal shim from each pad.
  5. Measure pad lining thickness. If they do not meet specification, they must be replaced. See DISC BRAKE SPECIFICATIONS .
  6. To install, reverse removal procedure. If replacing worn pads, the ant-squeal shims must be replaced. Apply disc brake grease to both sides of each inner anti-squeal shim.
  7. Install anti-squeal shims to each pad.
  8. Install inner pad with wear indicator plate facing upward, and install outer pad.
  9. Install front brake caliper. See FRONT BRAKE CALIPER .
scientia non olet · About LEMON Manuals