LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Overhaul >> Rear Caliper >> Disassembly (GS 300, GS 430, IS 300 & SC 430)

Disassembly (GS 300, GS 430, IS 300 & SC 430)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear caliper. See REAR BRAKE CALIPER  under REMOVAL & INSTALLATION.
  2. Using a screwdriver, remove set rings and boots. See Figure.
  3. Prepare a wooden plate to hold pistons.
  4. Place plate between pistons and insert a pad on one side.
    WARNING: Do not place your fingers in front of piston when using compressed air.
  5. Use compressed air to remove pistons alternately from caliper.
  6. Using a screwdriver, remove piston seals from caliper.
scientia non olet · About LEMON Manuals