LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Overhaul >> Rear Caliper >> Disassembly (ES 300)

Disassembly (ES 300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear disc caliper. See REAR BRAKE CALIPER .
  2. Remove brake pads with anti squeal shims. See Figure.
  3. Remove bolts and disc brake caliper mounting.
  4. Using a screwdriver, remove set ring and cylinder boot from disc brake caliper.
  5. Place a piece of cloth between piston and disc brake caliper.
  6. Use compressed air to remove piston from disc brake caliper.
  7. Using a screwdriver, remove piston seal from disc brake caliper. Do not damage inner caliper and caliper groove.
  8. Remove rear disc brake bleeder screw cap and screw.
  9. Check caliper bore and piston for rust or scoring.
scientia non olet · About LEMON Manuals