LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Overhaul >> Master Cylinder >> Disassembly (RX 300)

Disassembly (RX 300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove master cylinder. See MASTER CYLINDER  under REMOVAL & INSTALLATION.
  2. Mark reservoir hoses with a paint line facing upward. Using pliers, slide 2 clips, and remove reservoir hoses from reservoir.
  3. Remove cap and strainer from reservoir.
  4. Remove set screw and pull out inlet union. Remove 2 grommets.
  5. Using a screwdriver with a taped tip, push in piston and remove straight pins by turning over cylinder body. Pulling straight out, remove pistons and springs by hand.
scientia non olet · About LEMON Manuals