LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Overhaul >> Front Caliper >> Disassembly (GS 300, GS 430 & IS 300)

Disassembly (GS 300, GS 430 & IS 300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove brake caliper from vehicle. See FRONT BRAKE CALIPER  under REMOVAL & INSTALLATION. Using a screwdriver, remove set rings and caliper boots from caliper piston.
    WARNING: Do not place your fingers in front of the piston when using compressed air.
  2. Put a piece of cloth or equivalent between piston and caliper. Use compressed air to push pistons from caliper bore into cloth.
  3. Using a screwdriver, Remove piston seals from caliper. Remove sliding pins from torque plate.
  4. Using a screwdriver and hammer, tap out dust boots.
scientia non olet · About LEMON Manuals