LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Disc Brakes) >> Overhaul >> Front Caliper >> Assembly (GS 300, GS 430 & IS 300)

Assembly (GS 300, GS 430 & IS 300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply lithium soap base glycol grease to seal lips, sliding pins, dust boots, sliding bushing and caliper piston. See Figure.
  2. Tap new dust boots into torque plate with a 21 mm socket. Ensure that metal plate portion of dust boot fits snugly in torque plate.
  3. Insert sliding pin with sliding bushing into bottom side.
  4. To complete assembly, reverse disassembly procedure. Bleed brake system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals