LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Manual A/C-Heater Systems) >> Manifold Gauge Set >> Take Down

Take Down

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close both hand valves of manifold gauge set.
  2. Disconnect quick disconnect adapters from service valves on refrigerant line.
    Fig 1: Disconnecting Quick Disconnect Adapters From Service Valves
    G01090976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE: Slide the sleeve of the quick disconnect adapter upward to unlock the adapter and remove it from the service valve.
  3. Install caps to service valves on refrigerant line.