On-Vehicle Inspection
WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect condenser fins for blockage or damage.
- If the fins are clogged, wash them with water and dry with compressed air.CAUTION: Be careful not to damage the fins.
If the fins are bent, straighten them with a screwdriver or pliers.
- If the fins are clogged, wash them with water and dry with compressed air.
- Inspect condenser and fittings for leakage.
- Using a gas leak detector, check for leakage of refrigerant.
- If there is leakage, check the tightening torque at the joints.