LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Turn Signal & Hazard Warning System) >> Inspection >> Inspect Hazard Switch Continuity

Inspect Hazard Switch Continuity

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
HAZARD SWITCH CONTINUITY

Switch position Tester connection Specified condition
OFF - No continuity
ON 1 - 2 Continuity
Illumination circuit 8 - 9 Continuity

If continuity is not as specified, replace the switch.

Fig 1: Inspecting Hazard Switch Continuity
G03376873Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002