Inspection Procedure
WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
- Check the clearance sonar sensor (See INSPECTION
)
- NG : Replace clearance sonar sensor.
- OK : Go to next step.
- Check wire harness and connector between clearance sonar sensor and clearance sonar ECU (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
).
- NG : Repair or replace wire harness or connector.
- OK : Replace clearance sonar ECU (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE ).