LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (LEXUS Link System - Diagnosis) >> Circuit Inspection >> DTC 3 "CODE 3. Transceiver failure" >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for open and short circuit in harness and connector between telephone ECU (Mayday ECU) and transceiver (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Replace or repair wire harness connector. 
    2. OK : Replace the telephone transceiver (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 

    HINT:

    If DTC is not cleared even though the transceiver is replaced, replace the telephone ECU (Mayday ECU).