LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Driver Door Control System - Diagnosis) >> Circuit Inspection >> Driving position memory switch circuit (W/ memory) >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check driving position memory switch (See  INSPECTION  ). 
    1. NG : Replace driving position memory switch. 
    2. OK : Go to next step. 
  2. Check wire harness and connector between driving position memory switch and driver door ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About LEMON Manuals