LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Passenger Side Junction Block (Body No. 3 ) Control System - Diagnosis) >> Circuit Inspection >> Passenger Seat Belt Tension Reducer Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the passenger buckle tension reducer solenoid (See  INSPECTION  ). 
    1. NG : Replace the passenger buckle tension reducer solenoid. 
    2. OK : Go to next step. 
  2. Check wire harness and connector between passenger buckle tension reducer solenoid and passenger side J/B ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown on problem symptom table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About LEMON Manuals