LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Controls - Removal, Overhaul & Installation) >> Ignition System >> Camshaft Position (CMP) Sensor >> Installation (GS300 & IS300)

Installation (GS300 & IS300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.

Install NEW engine oil dipstick guide "O" ring. Apply a few drops of oil to "O" ring, before installation. Install NEW A/T oil dipstick guide "O" ring. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Exploded View Of Air Intake Chamber & Engine Components (GS300 & IS300)
G00131802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002