LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Throttle Body >> Removal (ES300)

Removal (ES300)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Drain coolant. Disconnect MAF sensor connector. Disconnect VSV connector for Canister Closed Valve (CCV) and air hose. Disconnect 4 vacuum hoses and ventilation hose. Remove air cleaner cap with hose. Remove front suspension center upper brace.
  2. Disconnect throttle position sensor connector. Disconnect throttle control motor connector. SeeFig 1. Disconnect 2 water bypass hoses. See Fig 2. Remove 4 bolts, throttle body and gasket. See Fig 3.
    Fig 1: Exploded View Of Throttle Body Assembly (ES300)
    G00131807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Removing Water Bypass Hoses (ES300)
    G00131808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 3: Removing Throttle Body Bolts (ES300)
    G00131809Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002