Installation (RX300)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Lexus SC 430, 2002 Lexus RX 300, 2002 Lexus LX 470, 2002 Lexus LS 430, and 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
Using compressed air, clean all passages. Clean throttle body gasket surfaces. Install NEW gaskets, "O" rings and throttle bodies. See Figure. Tighten throttle body screws to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure. Fill cooling system with proper mix of water and coolant. If throttle body assemblies were removed from intake air control valve, throttle body lever adjustment may be necessary. See THROTTLE BODY LEVER ADJUSTMENT in ON-VEHICLE ADJUSTMENTS article.