LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Power Tilt & Telescopic Steering Column - Diagnosis) >> Circuit Inspection >> DTC B2610 Tilt Position Sensor or Tilt Motor Circuit Malfunction >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check sensor power source circuit (See  SENSOR POWER SOURCE CIRCUIT  ). 
    1. NG : Repair or replace malfunction part. 
    2. OK : Go to next step. 
  2. Check actuator power source circuit (See  ACTUATOR POWER SOURCE CIRCUIT  ). 
    1. NG : Repair or replace malfunction part. 
    2. OK : Go to next step. 
  3. Check tilt motor circuit (See  TILT MOTOR CIRCUIT  ). 
    1. NG : Repair or replace malfunction part. 
    2. OK : Check and replace the power tilt and power telescopic ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
scientia non olet · About LEMON Manuals