LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Controls - System & Component Testing) >> Engine Sensors & Switches >> Crankshaft Position Sensor

Crankshaft Position Sensor

WARNING: This page is about a different car, the 2002 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

Crankshaft Position Sensor (CKP) sensor is a pick-up coil that is mounted next to crankshaft pulley. Turn ignition off. Disconnect CKP sensor connector. Measure resistance between CKP sensor terminals. Replace CKP sensor if resistance is not as specified. See CRANKSHAFT POSITION SENSOR RESISTANCE  table.

CRANKSHAFT POSITION SENSOR RESISTANCE

Coolant Temperature °F (°C) Ohms
-14-122 (-0-50) 1630-2740
123-212 (51-100) 2065-3225