Camshaft Position Sensor
WARNING: This page is about a different car, the 2002 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
Remove engine cover. Locate Camshaft Position (CMP) sensor. Sensor is mounted to front of left upper (No. 3) timing belt cover. Disconnect CMP sensor 2-pin connector. Measure resistance between CMP sensor terminals. Replace CMP sensor if resistance is not as specified. See CAMSHAFT POSITION SENSOR RESISTANCE table.
CAMSHAFT POSITION SENSOR RESISTANCE
| Coolant Temperature °F (°C) | Ohms |
|---|---|
| -14-122 (-0-50) | 835-1400 |
| 123-212 (51-100) | 1060-1645 |