LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 403 (Automatic Transaxle - Diagnosis) >> DTC P0717: Turbine Speed Sensor Circuit No Signal >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.

The NT terminal of the ECM detects the revolving signal from speed sensor (NT) (input RPM). The ECM outputs a gearshift signal comparing the speed sensor (NT) with the speed sensor (NC).

While the vehicle is operating in the 2nd, 3rd, 4th or 5th gear position in the shift position of D, if the input shaft revolution is less than 300 RPM (*3) although the output shaft revolution is more than 1,000 RPM (*4), the ECM detects the trouble, illuminates the MIL and stores the DTC.

(*3) Pulse is not output or is irregularly output.

(*4) The vehicle speed is 50 km/h (31 mph) or more.

scientia non olet · About LEMON Manuals