Inspection Procedure

WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ACTIVE TEST BY HAND-HELD TESTER (ABS PUMP MOTOR OPERATION)
1. Select the item "ABS MOT RELAY" in the ACTIVE TEST and operate the ABS motor relay on the hand-held tester.
2. Check the operation sound of the ABS pump motor when operating it with the hand-held tester.
  OK:
  
  The operation sound of the ABS pump motor should be heard.
1. NG: CHECK AND REPLACE BRAKE ACTUATOR ASSY
2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )