LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0340: Camshaft Position (CMP) Sensor Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.

CMP sensor is a pick-up coil mounted to outer corner of left cylinder head, just below valve cover. A one tooth signal plate is mounted to outer camshaft. DTC is set when either no cranking or engine running signal is received by ECM from CMP sensor. Possible causes are: