LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0335 Or DTC P1335: Crankshaft Position (CKP) Sensor Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.

The CKP sensor is a pick-up coil mounted next to crankshaft pulley. A 34-tooth signal plate is mounted to crankshaft. DTC P0335 is set if no cranking signal is received by ECM from CKP sensor. DTC P0335 is also set if no signal is received by ECM from CKP sensor with engine speed of 600 RPM or more. DTC P1335 is set if no engine running signal is received by ECM from CKP sensor with engine speed of 1000 RPM or more. Possible causes are:

scientia non olet · About LEMON Manuals