After Reassembly, Check Magnetic Clutch Clearance
WARNING: This page is about a different car, the 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
- Set the dial indicator to the pressure plate of the magnetic clutch.
- Connect the magnetic clutch lead wire to the positive (+) terminal of the battery.
- Check the clearance between the pressure plate and rotor when connecting the negative (-) terminal to the battery.
- Standard clearance: 0.5 +/- 0.15 mm (0.020 +/- 0.0059 in.)
If the clearance is not within the standard, adjust the clearance using shims to obtain the standard.
Shims thickness:
- 0.1 mm (0.004 in.)
- 0.3 mm (0.012 in.)
- 0.5 mm (0.020 in.)