DTC P1300, DTC P1305, DTC P1310, DTC P1315, DTC P1320 &/Or DTC P1325: Notes
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
Code Definition
- DTC P1300: Ignitor No. 1 Circuit Malfunction
- DTC P1305: Ignitor No. 2 Circuit Malfunction
- DTC P1310: Ignitor No. 3 Circuit Malfunction
- DTC P1315: Ignitor No. 4 Circuit Malfunction
- DTC P1320: Ignitor No. 5 Circuit Malfunction
- DTC P1325: Ignitor No. 6 Circuit Malfunction
CAUTION:
If ECM replacement is instructed in following testing, always ensure ECM connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - IMPORT
article in GENERAL INFORMATION, or appropriate ENGINE IMMOBILIZER SYSTEMS article in ACCESSORIES & EQUIPMENT.
NOTE:
For component location, see appropriate illustration in THEORY & OPERATION
article.