Circuit Description
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
Air/Fuel (A/F) sensor monitors exhaust gas oxygen content and delivers an input signal to ECM. ECM uses input signal to control air/fuel ratio. A/F sensor includes a heater. DTC P1130 is for bank No. 1 A/F sensor. DTC P1150 is for bank No. 2 A/F sensor. DTC is set when A/F sensor voltage output remains the same with engine running after engine is warmed to normal operating temperature. Possible causes are:
- A/F sensor circuit is open or shorted.
- Defective A/F sensor.
- Air induction system malfunction.
- Improper fuel pressure.
- Defective fuel injector.
- Defective ECM.