Circuit Description
WARNING: This page is about a different car, the 2002 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- The BRAKE warning light lights up when the brake fluid is insufficient, when the parking brake is applied or when the EBD is defective.
- If the skid control ECU detects trouble, it lights the BRAKE warning light while at the same time prohibiting ABS control. At this time, the ECU records a DTC in memory.
Connect terminals Tc and E1 of the DLC1 or Tc and CG of the DLC3 to make the BRAKE warning light blink and output the DTC.