LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Abs With BA & EBD System - Diagnostics) >> Circuit Inspection >> DTC C1244/44: Deceleration Sensor Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check Wire Harness And Connector (Deceleration Sensor - Skid Control ECU).  See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
    1. OK: Go To Next Step  .
    2. NG: Repair Or Replace Harness Or Connector 
  2. Inspect Deceleration Sensor. See  PRE-CHECK  . 
    1. OK: Check And Replace Skid Control ECU Assy. 
    2. NG: Replace Deceleration Sensor 
scientia non olet · About LEMON Manuals