Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Check DTC Once More (See PRE-CHECK )

Fig 1: Reviewing DTC Information
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. A : Go To Next Step .
2. B : Repair Circuit Indicated By Output Code
Check Wire Harness And Connector (DLC3 - Skid Control ECU). See HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS .
1. OK: Check And Replace Brake Actuator Assy.
2. NG: Repair Or Replace Wire Harness And Connector