LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Air Conditioning System) >> Drive Belt >> Drive Belt Installation >> Install Drive Belt

Install Drive Belt

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the idle pulley lock nut temporally.

    Torque: 2.5 N.m (25 kgf.cm, 22 in.lbf) 

  2. Install the drive belt.
  3. Apply drive belt tension by adjusting bolt.

    Drive Belt Tension

    1. New belt: 110 plus or minus; 11 lbf  .
    2. Used belt: 67 plus or minus; 10 lbf  .
  4. Tighten the tension pulley lock nut.
    Fig 1: Locating Drive Belt Adjusting Bolt & Tension Pulley Lock Nut
    G01065404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Torque: 40 N.m (410 kgf.cm, 30 ft.lbf) 

scientia non olet · About LEMON Manuals