Air Outlet Servomotor: Inspection
WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- Remove INSTRUMENT PANEL AND REINFORCEMENT .
- Remove air outlet servomotor
:
- Disconnect the connector.
- Remove the 4 screws and servomotor.
- Inspect air outlet servomotor circuit . See DTC 43: AIR OUTLET DAMPER CONTROL SERVOMOTOR CIRCUIT .
- Inspect air outlet damper position sensor circuit . See DTC 33: 43 AIR OUTLET DAMPER POSITION SENSOR CIRCUIT .
- Install air outlet servomotor .
- Install reinforcement and instrument panel .