Air Mix Servomotor: Inspection
WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- Remove INSTRUMENT PANEL AND REINFORCEMENT .
- Remove air mix servomotor
:
- Disconnect the connector.
- Remove the 3 screws and servomotor.
- Inspect air mix servomotor circuit . See DTC 41: AIR MIX CONTROL SERVOMOTOR CIRCUIT .
- Inspect air mix damper position sensor circuit . See DTC 31: 41 AIR MIX DAMPER POSITION SENSOR CIRCUIY .
- Install air mix servomotor .
- Install reinforcement and instrument panel .