Installation Of Inverter Radiator

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Install inverter radiator :
Install the inverter radiator with the 3 nuts.

Fig 1: Identifying Inverter Radiator Mounting Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) .
Connect 2 water hoses .
Install water temperature switch .
Torque: 7.4 N.m (75 kgf.cm, 65 in.lbf) .
Connect water temperature switch connector .
Connect ambient temperature sensor .
Install FRONT BUMPER COVER .
Fill with HV coolant . See Step 2) Replace Coolant in HYBRID TRANSAXLE ON-VEHICLE REPAIR .