Install Blower Motor Control

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Using an air riveter or hand riveter, install the blower motor control.

Fig 1: Identifying Blower Motor Control Mounting Rivets

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

Do not prize a riveter, as riveter is damaged, it is not tightened and the mandrel is bent.

Fig 2: Causes Of Improper Rivet Installation (1 Of 3)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Do not tilt the riveter and disconnect the rivet from the material while handling a riveter, as the materials are not tightened firmly.

Fig 3: Causes Of Improper Rivet Installation (1 Of 3)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Install the rivet while attaching materials, as they are not tightened firmly.

Fig 4: Causes Of Improper Rivet Installation (1 Of 3)