Reassembly Of Converter & Inverter

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Install water hose .
Install bracket .
Install the 4 brackets with the 6 bolts.

Torque: 25 N.m (255 kgf.cm, 18 ft.lbf) .
Install inverter cover :
1. Install a new gasket to the inverter cover.
2. Install the inverter cover with the 12 bolts.
  Torque: 2.5 N.m (25 kgf.cm, 22 in.lbf) .
  
  Fig 1: Identifying Inverter Cover Bolts & Gasket Orientation
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Install inverter reservoir tank :
1. Install a new O-ring to the inverter reservoir tank.
2. Install the inverter reservoir tank with the 2 bolts and nuts.
  Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) .
  
  Fig 2: Identifying Inverter Reservoir Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002