LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Electric Motor Power Steering - Diagnostics) >> Circuit Inspection >> DTC C1515/15: Torque Sensor Zero Point Calibration Not Performed >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Is DTC except C1515/15 output? 

    Check DTC. See DIAGNOSTIC TROUBLE CODE CHART .

    1. YES:  Repair circuit indicated by code output.
    2. NO:  Go to  2.
  2. Perform calibration of torque sensor zero point  . See  - CALIBRATION OF TORQUE SENSOR ZERO POINT.
  3. Is DTC C1516/16 output? 

    Check DTC. See DIAGNOSTIC TROUBLE CODE CHART .

    1. NO:  No problem.
    2. YES:  Repair circuit indicated by DTC C1516/16. See DTC C1516/16: CALIBRATION OF TORQUE SENSOR ZERO POINT NOT COMPLETED .
scientia non olet · About LEMON Manuals