LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Steering System) >> Tilt Steering Column >> Removal >> Step 17 - Remove Main Shaft Lower Dust Seal

Step 17 - Remove Main Shaft Lower Dust Seal

WARNING: This page is about a different car, the 2002 Toyota Prius and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 nuts and parking brake cable bracket.
    Fig 1: Locating Parking Brake Cable Bracket Mounting Nuts
    G01066386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Remove the 2 bolts and disconnect the accelerator pedal.
  3. Remove the 3 nuts and main shaft lower dust seal.
scientia non olet · About LEMON Manuals