Step 11 - Disconnect No. 2 Intermediate Shaft Assembly

WARNING: This page is about a different car, the 2002 Toyota Prius and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Place matchmarks on the No. 2 intermediate shaft assembly and control valve shaft.

Fig 1: Locating No. 2 Intermediate Shaft Matchmarks & Identifying Bolts A & B
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Loosen the bolt "A" and remove the bolt "B", then disconnect the No. 2 intermediate shaft assembly from the control valve shaft.