LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Steering System) >> Tilt Steering Column >> Installation >> Step 4 - Install No. 2 Intermediate Shaft Assembly

Step 4 - Install No. 2 Intermediate Shaft Assembly

WARNING: This page is about a different car, the 2002 Toyota Prius and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily install the No. 2 intermediate shaft assembly to the sliding yoke with the bolt.