LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Steering System) >> Tilt Steering Column >> Installation >> Step 3 - Install Sliding Yoke

Step 3 - Install Sliding Yoke

WARNING: This page is about a different car, the 2002 Toyota Prius and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Install the sliding yoke to the main shaft assembly with the bolt.

Torque: 35 N.m (360 kgf.cm, 26 ft.lbf)  .

scientia non olet · About LEMON Manuals